Axis Communications 223M user manual Status and Network indicator LEDs are flashing red rapidly

AXIS 223M - Troubleshooting 59

	Poor rendering of MPEG-4 images.	Color depth set incorrectly on clients. Set to 16-bit or 32-bit color.
		If text overlays are blurred, or if there are other rendering problems, you may need to
		enable Advanced Video Rendering. This is done on the MPEG-4 tab in the AMC control
		panel applet.
		Ensure that your graphics card is using the latest device driver. The latest drivers can
		usually be downloaded from the manufacturer's web site.
		If images are degrading, try decreasing the GOV length, see Advanced settings, on page
		20.
	Color saturation is different in MPEG-4	Modify the settings for your graphics adapter. Please see the adapter's documentation
	and Motion JPEG.	for more information.
The	test image does not display as expected
	Image settings.	Not all settings have an effect on the test image. For more information, see the help for
		Image Settings.
The	Power indicator is not constantly lit
	Faulty power supply.	Check that you are using the correct power supply. See Technical Specifications, on
		page 61.
The
	Status and Network indicator LEDs are flashing red rapidly
	Hardware failure.	Contact your Axis dealer.
The
	Status indicator LED is flashing red and the camera is inaccessible
	A firmware upgrade has been inter-	See the Emergency recovery procedure, on page 56.
	rupted or the firmware has otherwise
	been damaged.
Poor quality snapshot images
	Screen incorrectly configured on your	In Display Properties, configure your screen to show at least 65000 colors, i.e. at least
	workstation.	16-bit. Using only 16 or 256 colors will produce dithering artifacts in the image.
Browser freezes
	Safari or Mozilla 1.4 (or later) can	Lower the image resolution.
	sometimes freeze on a slow computer.
Problems uploading files
	Limited space.	There is only limited space available for the upload of your own files. Try deleting one
		or more existing files, to free up space.
	Missing images in uploads.	This can occur when trying to use a larger image buffer than is actually available. Try
		lowering the frame rate or the upload period.
Overlay is not displayed
	Incorrect size or location of overlay.	The overlay may have been positioned incorrectly. Refer to the online help for informa-
		tion on the limitations when using image overlays and privacy masks.
Motion Detection triggers unexpectedly
	Changes in luminance.	Motion detection is based upon changes in luminance in the image. This means that if
		there are sudden changes in the lighting, motion detection may be mistakenly trig-
		gered. Lower the sensitivity setting to avoid problems with luminance.

For additional assistance, please contact your reseller or see the support pages on the Axis Website at www.axis.com/techsup