B&B Electronics HVD100A3 manual Baud Rate Example, Byte Function, Number, Value

Baud Rate Example

To set the PC baud rate to 57,600 baud, N,8,1, format the message as follows.

Byte	Byte	Byte Function
Number	Value
	Hex
1	01	Start of frame
2	05	Number of control bytes
3	08	Command byte (08 = internal command)
4	01	Function Bbte (01 = change baud)
5	03	UB3
6	08	Baud 1
7	00	Baud 2
8	00	Number of data bytes
9	1A	Checksum

The first byte is the start of frame and always 01. Next is the number of control bytes (05). There are 5 bytes in the control section (in gray). Byte number 3 sets the HDV100A3 to an internal operation (08). Byte 4 is the internal function to be executed; (01) is the change baud command. Bytes 5, 6, and 7 set the baud rate, parity, stop bits and word length. Next is the number of data bytes, in this case there are no data bytes. Last is the checksum, the value is the 8 bit addition of bytes 1 to 8.

8	HDV100A3 Command & Response Manual-1306cr
B&B Electronics --	707 Dayton Rd.	-- PO Box 1040 -- Ottawa, IL 61350
PH (815) 433-5100 --		FAX (815) 433-5104