wise to set the receiver off when not in use. Sending the Start Receive clears the mask. This renders the filter function useless.
Start Receive on J1939 Bus
Byte | Byte | Function | |
Number | Value |
|
|
1 | 01 | Start of frame | |
2 | 02 | Control bytes | |
3 | 02 | ID byte 02 = J1939 message | |
4 | 01 | Function code 01 start reception | |
5 | 00 | Data bytes | |
6 | 06 | Checksum | |
Stop Receive on J1939 Bus | |||
|
|
|
|
Byte | Byte |
| Function |
Number | Value |
|
|
1 | 01 |
| Start of frame |
2 | 02 |
| Control bytes |
3 | 02 |
| ID byte 02 = J1939 message |
4 | 00 |
| Function code 00 stop reception |
5 | 00 |
| Data bytes |
6 | 05 |
| Checksum |
20 | HDV100A3 Command & Response | |
B&B Electronics | 707 Dayton Rd. | |
PH (815) | FAX (815) | |
