B&B Electronics HVD100A3 manual Byte 4 Values, Byte 6 Priority Values

To stop broadcast transmission it is not necessary to send the whole message. The message below will stop broadcast transmission.

Byte	Byte		Function
Number	Value
1	01		Start of frame
2	02		Control bytes
3	01		ID byte 1 = J1708 message
4	07		Set broadcast 7 = On X = Time interval (see chart)
7	00		Data bytes
8	0B		Checksum
Byte 4 Values
Byte	Time
Value	Value
07	Stop broadcast
17	.5 sec.
27	1.0 sec
37	1.5 sec
47	2.0 sec
Byte 6 (Priority) Values
Byte Value		Byte Value		Priority
(hex)		Binary
01		00000001		1
02		00000010		2
04		00000100		3
08		00001000		4
10		00010000		5
20		00100000		6
40		01000000		7
80		10000000		8

18	HDV100A3 Command & Response Manual-1306cr
B&B Electronics --	707 Dayton Rd.	-- PO Box 1040 -- Ottawa, IL 61350
PH (815) 433-5100 --		FAX (815) 433-5104