Byte | Byte | Function |
Number | Value |
|
1 | 01 | Start of frame |
2 | 02 | Number of control bytes |
3 | 08 | ID byte 08 = internal command |
4 | 20 | Function code 20 = stop time stamping |
5 | 00 | Number data bytes |
6 | 2B | Checksum |
To resume time stamping send the following command:
Byte | Byte | Function |
Number | Value |
|
1 | 01 | Start of frame |
2 | 02 | Number of control bytes |
3 | 08 | ID byte 08 = internal command |
4 | 10 | Function code 10 = resume time stamping |
5 | 00 | Number data bytes |
6 | 1B | Checksum |
Time stamping will resume after reset.
10 | HDV100A3 Command & Response | |
B&B Electronics | 707 Dayton Rd. | |
PH (815) | FAX (815) | |
