TM
SLE100 Installation Manual
3.5 Radio Installation
Perform the following steps to attach the radio to the Yoke Mounting Bracket:
1.Determine desired polarization of the link, vertical or horizontal, and orient the radio accordingly using the diamond shaped polarity indication stickers shown in Figure
When the radio comes from the factory, the mounting plates are in the vertical polarization position, that is, the diamond marking on the front of the radio housing is to the right when viewed from the front. For horizontal polarization, the mounting plates should be moved so that the diamond is at the top when viewed from the front. Verify that the flexible conduit entrance is on one of the lower sides of the radio.
Figure 3-8: Polarization Diamond Orientations
The blue color label indicates a high band radio and the red color label indicates a low band radio
16 |
