Fyrite® INSIGHT
4.14 Printing Test Data
Combustion, pressure, or temperature data that is currently being dis- played can be sent to a printer using IrDA protocol as described below.
Data that is stored in memory can also be printed by first displaying the stored test data as described in Section 4.13.
In addition to printing combustion, pressure, and temperature data, the contents of any screen that shows the label “PRINT” above the F1 button can be printed. For example, the information shown in the DIAGNOSTIC screen can be printed.
Fyrite® INSIGHT
4.15 Fyrite® User Software Installation
Windows XP Operating System
After the CD is loaded, the Setup window will be displayed. Click on OK. (If applicable, wait for the Net 3.5 Framework set up to complete.)
Click "Next" on the “Welcome” screen to begin the installation.
1.Power up the printer. Refer to the printer’s instruction manual for detailed operating infor- mation. If not previously done, select the follow- ing for the printer for:
•8 bit
•No parity
•9600 baud
•IrDA is set to
•DTR
handshaking
2.Align the printer with the top of the analyzer.
3.Press the PRINT (F1) button to begin print- ing.
|
|
| BACHARACH, INC. | |
|
|
| Fyrite Insight | |
|
|
| SN: | |
|
|
| Time: 01:28:27 PM | |
|
|
| Date: 10/22/08 | |
|
|
|
| Fuel |
|
|
|
| Nat Gas |
|
|
| O2 | 4.0 % |
|
|
| CO | 12 ppm |
|
|
| Eff | 82.6 % |
|
|
| CO2 | 9.5 % |
|
|
| 374 oF | |
F1 | F2 | F3 | 68.0 oF | |
|
|
| EA | 21.3 % |
|
|
| CO (3) | 13 ppm |
HOLDRUN | ESC | PWR | Comments: | |
|
|
|
Respond to the prompts on the screens that follow.
Click on: “Finish”...
“Next”...
“Close”...
“OK”...
Fig. 4.2
After the installation,
•Open Fyrite® User Software via the desktop icon.
•Connect the instrument to the PC with a USB cable and power up the unit.
30 | Instruction |
| Instruction | 31 |