Data Capture
for Workforce
in Motion
8.D-Fly settings
The Settings window displays eight buttons and five groups:
-General information
-Current Operating Mode information
-Shutdown Timer information
-Battery
-Other Settings
The following two tables show the General information fields:
Field | Functionality |
Application | Version of embedded Baracoda software |
Name | Bluetooth name of the barcode reader |
The table below shows the user the Operating Mode options that they can set:
Field | Functionality | |
Batch | Set the batch mode: scanned barcodes are stored in | |
| can be uploaded to the application later (click on “Batch config” for more | |
| advanced settings). Batch mode is supported on | |
| “B401202xx” (firmware v1.54 and newer). | |
Real time | Set the | |
| immediately when the Bluetooth radio connection is active. If the connection | |
| is not established the barcodes are lost, unless “Enable Buffering” is set (see | |
| below). | |
Master | Set the Master mode: The barcode reader automatically creates connection | |
| to the specified Host device when the user scans a barcode. Then the reader | |
| works as in real time mode. | |
Host addr. | For use in Master mode : Set, in the address field, the Bluetooth address of | |
| the host device the reader has to connect to. | |
The following table shows the Shutdown Timer fields that you can set: | ||
Field | Functionality | |
When connected | Set the delay (in minutes) after which the barcode reader switches off, when | |
| the barcode reader is connected and without any activity. | |
When not connected | Set the delay (in minutes) after which the barcode reader switches off, when | |
| the barcode reader is not connected and without any activity. | |
The following table shows the Battery field: | ||
Field | Functionality |
|
Battery | Battery level |
|
BaracodaManager for PC – User Guide v3.39 | - 26 - |
