Baracoda Bluetooth Headset manual Select to Activate Trigger mode Manual Scan Autoscan Engine

Data Capture

for Workforce

in Motion

8.2.Product settings

To find out more about the product settings, please refer to the barcode reader User Manual.

Check the box to activate Baracoda Header

Check the box to activate timestamp (supported on D-Fly with P/N “B401202xx”

(firmware >= v1.54))

Check the boxes to activate prefix/suffix

Check the box to activate beep when a barcode is decoded

Check the box to activate beep when a barcode is acknowledged by the host PC (when No data loss mode is active)

Select to	Select to
activate	activate
trigger mode	manual
of the scan	autoscan
engine	mode of the
	scan engine

Select to activate aiming trigger mode of the scan engine

Check the box to Activate no data loss

mode (acknowledgement)

When Prefix/Suffix box is checked, select Data format (ASCII or Hex) and type values in

active fields.

Configure the number of barcodes (0 or MAX) that are buffered by the reader (real time mode, reading barcodes while disconnected)

Select to	Select to disable	Select to disable
allow
	duplicate scans	duplicate scans
duplicate
	(duplicates not	(error beep when
scans
	decoded by the	a duplicate
Select beep	reader)	barcode is read)
volume (high or
low)

8.3.Bluetooth settings

To find out more about the Bluetooth settings, please refer to the barcode reader User Manual.

Select the duration

Check the box toof Sniff period activate PIN code

authentication

Reader’s PIN code, used when Security is enabled

BaracodaManager for PC – User Guide v3.39 - 28 -