Baracoda Bluetooth Headset Data Capture for Workforce in Motion , 11. Baracoda TagRunners settings

BaracodaManager for PC – User Guide v3.39 - 41 -
Data Capture
for Workforce
in Motion
11. Baracoda TagRunners settings
The Settings window displays eight buttons and five groups:
- General information
- Current Operating Mode information
- Shutdown Timer information
- Battery
- Other Settings
The following two tables show the General information fields:
Field
Functionality
Name
Bluetooth name of the RFID reader
Application
Version of embedded Baracoda software
RFID
Version of the RFID engine
The table below shows the user the Operating Mode options that they can set:
Field
Functionality
Batch
Set the batch mode: scanned barcodes are stored in non-volatile memory and
can be uploaded to th e application later (click on “Batch config” for more
advanced settings)
Real time
Set the Real-time mode: scanned barcodes are transmitted to the application
immediately when the Bluetooth radio connection is a ctive. If the connection
is not established the barcodes are lost, unless “Enable Buffering” is set (see
below).
The following table shows the Shutdown Timer fields that you can set:
Field
Functionality
When connected
Set the delay (in minutes) aft er which the barcode reader switches off, when
the barcode reader is connected and without any activity.
When not connected
Set the delay (in minutes) aft er which the barcode reader switches off, when
the barcode reader is not connected and without any activity.
The following table shows the Battery field:
Field
Functionality
Battery
Battery level (0-100%) and its current charging status.
The following table shows the Other Settings buttons that you can set: