Data Capture
for Workforce
in Motion
16.IdBlue settings
The Settings window displays eight buttons and five groups:
-General information
-Disconnected Mode information
-Shutdown Timer information
-RF Protocol
-Battery
-Other Settings
The following two tables show the General information fields:
Field | Functionality |
Decoder | Version of embedded Baracoda software |
Name | Bluetooth name of the barcode reader |
The table below shows the user the Disconnected Mode options that they can set: | |
Field | Functionality |
Batch | Set the batch mode: tags read when the reader is disconnected are stored in |
| |
| “Batch config” for more advanced settings) |
No batch | Set the no batch mode: tags read when the reader is disconnected are lost. |
The following table shows the Shutdown Timer fields that you can set: | |
Field | Functionality |
Device shutdown | Set the delay (in minutes) after which the barcode reader switches off |
| without any activity. |
RFID shutdown | Set the delay (in seconds) that the reader allocates for the user to read an |
| RFID tag after the reader button has been pressed. |
The following table shows the RF Protocol field: | |
Field | Functionality |
None | Disable the engine reading RFID tags. |
ISO 156693 | Only ISO tags will be read. |
Only IT HF tags will be read. | |
BaracodaManager for PC – User Guide v3.39 | - 64 - |
