Graphic board control panel
Barco Driver Properties
Accessing the Barco tab
Note: You must have logged on to Windows using an account with administrator privileges in order to use the Barco portions of the Windows Display Control Panel to change any display settings.
1.Open the Windows Display Control Panel by one of the methods below:
a)Start > Settings > Control Panel > Display
b)Open the “Display Properties Control Panel” by right clicking in an empty area on the desktop, then select
Properties.
c)Windows Vista: Right click in an empty area on the desktop, select “Personalization”, then click on“Display Settings”.
2.Click on the Settings tab (The Settings tab is not present in Vista).
3.Select the rectangle that represents the BARCO NIO FUSION 4MP Display whose settings you wish to change.
4.Click on the Advanced Settings button.
5.Select the Barco tab from the Properties screen.
Using the Barco tab
The Barco tab is divided into three sections. The first section provides information about the graphics controller and allows access to the graphics controller advanced configuration pages. The second section provides information about the display. The bottom section allows access to two Barco tools, Barco System Report and MediCal QAWeb. Also, there is a active link to the Barco Medical Imaging Systems web site.
6
