Display information

into edit mode. This is indicated by the scroll bar becoming longer.

 

SETTINGS

 

 

 

DPMS

 

On

 

 

On

Power LED

 

User Controls

 

On

EXIT

 

 

 

Figure 3: Setting is selected

 

 

 

SETTINGS

 

 

 

DPMS

 

On

Power LED

 

On

User Controls

 

On

EXIT

 

 

 

 

 

Figure 4: Edit mode is active

Use Up or Down to change the value. Use Enter to confirm the change.

Changes are saved automatically after confirming.

6.Some items in the menus cannot be changed. They are read- only values, displayed in light gray.

Tip:

While you are adjusting a value:

Touching Up and Down at the same time resets to the last stored value.

Touching Up and Enter at the same time selects the maximum value.

Touching Down and Enter at the same time selects the minimum value.

Stand-by switching

To switch from on state to stand-by:

1.Touch the Stand-by touch key.

19

Page 19
Image 19
Barco Fusion 4MP manual Stand-by switching, To switch from on state to stand-by, Touch the Stand-by touch key