P72895_F1D104-OSD-univ_man.qxd 7/16/01 3:24 PM Page 12
Usage (continued)
Bank 0 (Master)
1 | 2 | 3 | 4 |
Bank 1 (slave)
5 6 7 8
CONSOLE Keyboard, mouse and monitor
Bank 2 (slave)
Bank F (slave)
9 10 11 12
13 14 15 16
AutoScan Mode:
Enable AutoScan mode
In AutoScan mode, the OmniView™ PRO remains on one port for a number of seconds, before switching to the next. This time interval is set in the
NOTE: There is no mouse or keyboard control in this mode. This is necessary to prevent errors. Otherwise, if the user is moving the mouse or using the keyboard when the OmniView™ PRO switches to the next port, data flow is interrupted and will cause erratic mouse movement and/or the wrong characters to show up when using the keyboard.
To get out of AutoScan mode, press the SPACEBAR.
12
