Belkin F1DP116G, F1DP108G user manual Restoring Factory Defaults, To restore factory defaults

Using the Switch from a Remote Console

Restoring Factory Defaults

The “Restore Factory Settings” section on page 42 explains how to restore factory settings from the web interface. When you cannot access the system (you have forgotten the user name, IP address, or password), you can restore factory defaults from the Switch.

To restore factory defaults:

1.Press and hold down the “Go-Local” button on the back of the Switch for five seconds while powering up the Switch. The Switch will boot up in safe mode.

2.Wait 30 seconds for the Switch to reboot.

3.Log in with the default IP address of the unit: http://192.168.2.155/config

The blank login screen will appear (no background picture).

Note: Do not start the IP address with https.

4.Type in the following default user name and password (case-sensitive), and click “Login”. This user name and password only work immediately after the reset procedure described above.

Safe-Mode User	Safe-Mode Password
admin	SAFEmode

5.From the menu, select “Restore Factory Settings”. A warning will appear advising you that all device data will be erased.

6.Click “Restore”. The factory defaults will be restored. When the process finishes, you will be prompted to reboot.

7.Click “Reboot” to restart the Switch.

1

2

3

4

5

6

7

8

9

10

section

57