Belkin PM00781EA F5D8635-4 user manual Troubleshooting

Troubleshooting

Table of Contents sections 1 2 3 4 5 6 7 8 9 10

I am having difficulty setting up Wireless Protected Access (WPA) security on a Belkin wireless client card for a home network..

Clients must use the same key that the Router uses.. For instance, if the key is “Smith Family Network Key” in the Router, the clients must also use that same key..

1.Double-click the Signal Indicator icon to bring up the “Wireless Network” screen.. The “Advanced” button will allow you to view and configure more options of your card..

2.Once the “Advanced” button is clicked, the Belkin Wireless Utility will appear.. This Utility will allow you to manage all the advanced features of the Belkin Wireless Card..

3.Under the “Wireless Network Properties” tab, select a network name from the “Available Networks” list and click the “Properties” button..

4.Under “Network Authentication”, select “WPA-PSK (no server)..

5.Type your WPA key in the “Network key” box..

Important: WPA-PSK is a mixture of numbers and letters from A-Z and 0-9.. For WPA-PSK you can enter eight to 63 characters.. This network key needs to match the key you assign to your Router..

6.Click “OK, then “Apply” to save the settings..

I am NOT using a Belkin client card for a home network and I am having difficulty setting up Wireless Protected Access (WPA) security..

If you are not using a Belkin Wireless Desktop or Wireless Notebook Network Card that is not equipped with WPA-enabled software, a file from Microsoft called “Windows XP Support Patch for Wireless Protected Access” is available for free download.. Download the patch from Microsoft by searching the knowledge base for Windows XP WPA..

Note: The file that Microsoft has made available works only with Windows XP.. Other operating systems are not supported at this time.. You also need to ensure that the wireless card’s manufacturer supports WPA and that you have downloaded and installed the latest driver from their support site..

Supported Operating Systems:

•Windows XP Professional

•Windows XP Home Edition

1.Under Windows XP, click “Start > Control Panel > Network Connections”..

2.Right-clicking on the “Wireless Networks” tab will display the following screen.. Ensure the “Use Windows to configure my wireless network settings” check box is checked.. [need image]

3.Under the “Wireless Networks” tab, click the “Configure” button and you will see the following screen.. [need image]

4.For a home or small business user, select “WPA-PSK” under “Network Administration”..

Note: Select WPA (with radius server) if you are using this computer to connect to a corporate network that supports an authentication server such as a radius server.. Please consult your network administrator for further information..

N+ Wireless Modem Router 83