STB & PVR Function 56
The DP-H1 can record up to two programs simultaneously. If you intend
to record more than two programs simultaneously, a warning pop-up of
duplication will be displayed.
The following cases indicate when duplication occurs;
z
A new timer intended to be set conflicts with existing timers: set
three timers at the same time.
z
A new recording starts according to a timer while two programs are
being recorded.
z
A new timer overlaps with a current recording because the timer also
records the same service with the recording.
NOTE
z
The DP-H1 can record two programs simultaneously but the programs
should be broadcasted from the same channel.
z
When you set a new timer, the DP-H1 checks if the new timer
conflicts only with exiting timers: it does not check if the new timer
conflicts with recordings set by instant recording option.
z
In this case, the DP-H1 checks conflict when the timer starts.
1) Duplication When a New Timer Sets
You can not add a new timer to record three programs at the same time.
If this occurs, a pop-up list is displayed to show the list of duplicated
timers if a new timer is entered as duplication.
In order to add a new timer, please delete one group of timers displayed
in the duplication timer list. You can choose a group with the
LEFT/RIGHT
buttons.
If you don’t want to delete all of the previously set timers, please
reorganize (delete some of the previously set timers) the previous set
timers and make sure they don’t duplicate to a new timer. Press the
EXIT
button to cancel adding a new timer and reorganize the timers in
the timer list.