Beyonwiz DP-H1 manual Operating TV set, Automatic Code Search, Manual Set

Introduction

5-2. Operating TV set

The enclosed remote control can also be used to control a TV set provided by major TV manufacturers. In order to operate a TV with the enclosed remote control, please select TV mode by pressing the TV button. The red backlight beneath the TV button lights when you press a button in this mode.

There are two ways to program the remote control to work with your TV, automatic code search or manual set.

1) Automatic Code Search

Please turn on your TV then press and hold the TV button until the red- backlight turns on. Please point the remote control at your TV and click the UP button. After the red-backlight of the TV button blinks, please wait at least 3 seconds to check your TV turns off or not. If your TV turns off automatically, your remote control is ready to use for your TV. If your TV does not turns off, please repeat clicking the UP button until your TV turns off. Once your TV turns off after you click the UP button, please press the OK button. The TV button blinks three times to indicate that the remote control is set.

2) Manual Set

You can set your remote control with 3-digit code manually. Please look at the following table and find the brand of your TV.

Turn on your TV then press and hold the TV button until the red- backlight turns on. Please point the remote control at your TV and enter the 3-digit code with the NUMERIC buttons. Wait until the red- backlight blanks three times. If your TV turns off automatically, your remote control is ready to use for your TV. If your TV does not turns off, press the TV button and enter another code from the table under that brand.

FUJITSU	208	223	224	218	253
	261	286	307	325	329
	410	422	423
HITACHI	206	207	208	215	218
	229	231	232	236	238
	240	244	253	256	286
	287	292	298	299	300
	301	304	305	306	307
	309	3123	314	315	316
	317	325	358	367	381
	382	383	384	399	405
	406	407	410	411

7