Black & Decker B000NJBYX0, B6000CUC manual Care and Cleaning, Special Functions, Storing

•If additional ingredients are in the recipe, listen for the beep near the end of the kneading cycle about 25 minutes (8 minutes for Rapid White).

4.After Baking

•When the baking cycle is complete, you hear a beep. Press the I/O button; the red LED light turns off. For best results, remove bread immediately after baking process is complete.

• Open the lid and using oven mitts, pull the pan straight up and out to remove (G).

G

•Invert the bread pan over a wire rack and shake to remove bread. If necessary, use a nonstick spatula, inserted along the sides of the pan to loosen the bread

(H).

Important: Metal utensils might scratch the nonstick surface.

H

•Turn bread right side up and let it cool for about 20 minutes before slicing (J).

J

•If paddles remain in bread, allow bread to cool. Turn on its side and pull paddles out. It may be necessary to use a paring knife to remove baked bread from around the

	paddle. Use care to avoid scratching the nonstick coating
	on the paddles (K).
	Caution: The pan is very hot. To avoid burning counter
	surfaces, make sure to place it on a rack once the bread
K
	has been removed.

Important: The bread maker will not operate again until it has cooled down.

SPECIAL FUNCTIONS

Keep Warm Function

The keep warm function automatically begins when the baking cycle is completed. Bread can be kept warm for up to one hour. After one hour, remove the bread as instructed under section 4, After Baking.

Note: The crust softens if the bread stays in the unit.

Delay-Bake Timer

You can set the timer to delay the completion of your bread for up to 13 hours.

To Set the Timer:

•Add your recipe ingredients to the bread pan. Avoid perishable foods, such as milk, butter or margarine, eggs and cheese.

•Select your settings.

•Set the amount of time in which you want your bread to be ready. For example, if you set the timer at 8:00 p.m. in the evening and you want to wake up to fresh bread at 6:00 a.m., that is 10 hours.

•Use the ▲ button to increase the time in 10-minute increments until the display shows 10:00. This means that your bread will be completed in 10 hours (6:00a.m.).

•If necessary, use the ▼ button to decrease the time.

Tip: To increase or decrease the time quickly, press and hold down the appropriate buttons.

Care and Cleaning

This product contains no user serviceable parts. Refer service to qualified service personnel.

CLEANING

1.After each use, unplug the unit and let it cool.

2.If the kneading paddles remain in the bread pan, grip the kneading paddle and pull straight out to remove.

3.If you have trouble removing the kneading paddle from the appliance, add enough warm water to cover the paddles in the bread pan and allow to soak for 10 – 15 minutes to loosen the blades.

4.Wash the bread pan and kneading paddles in warm, soapy water or in the dishwasher.

Important: Do not use abrasive cleansers or steel wool to clean the bread pan or kneading paddles. These could damage the nonstick coating.

5.Wipe the outside of the unit with a damp cloth. Do not immerse in water or other liquid.

STORING

1.Make sure the unit is unplugged, clean and dry.

2.Store the unit with the lid closed.

3.Do not place heavy objects on the lid.

ENGLISH

18 19