A/C-7P RO, A/C-7S RO

COMMAND 20: AUTOMATIC FUNCTION AT END OF JOB

Sets the printer in accordance with the RPQ installed in the control unit.

VALUE

DESCRIPTION

*0

NL is automatically

 

executed after the

 

buffer is completed

 

(unless a FF, NL, or

 

CR was last in the

 

buffer).

1FF is automatically executed after the print buffer is completed (unless a FF was last in the buffer).

NOTES

To use this function, the

RPQ should be:

IBM 3268 RPQ SC9507

IBM 3287 RPQ SC3740

IBM 4214 OPT 20=2

Available only in LU3 (non-

SCS) operation.

Do not press the form feed or line feed buttons on the front of the printer. This will cause the host and printer to lose synchronization of paper position. This command reduces the need to advance the paper.

Example: &%Z20,1 sets the printer to issue a FF automatically at the end of the print buffer.

*Factory-default setting.

COMMAND 21: PRINT QUALITY (FastDraft)

Defines default print quality.

VALUE

DESCRIPTION

*0

The Page

 

Presentation Media

 

(PPM) commands

 

control the quality:

 

DP Quality (01) =

 

FastDraft and DP

 

Text Quality (02) =

 

normal draft.

1All DP draft output is printed FastDraft

2All DP draft output is printer normal draft

3Value 0 reversed, 01 = normal and 02 = FastDraft

4All output is Near Letter Quality

Example: &%Z21,1 selects all DP output as FastDraft printing.

39

Page 38
Image 38
Black Box A/C-7S RO, A/C-7P RO manual Command 20 Automatic Function AT END of JOB, Command 21 Print Quality FastDraft