Black Box A/C-7S RO, A/C-7P RO manual XY Coordinate System on

A/C-7P RO, A/C-7S RO

Physical Page

	X
X,Y
origin
(0,0)	Printable Area
	X
	Y

Physical Page

	X
X,Y
origin	Printable Area
(0,0)
	X
	Y

Figure 6-9. XY Coordinate System on the Page.

2.The complete command string must be entered as shown below. Incomplete command strings and command strings with invalid values (such as spaces) will cause the A/C-7 RO to print the string at the place where the error occurred.

For example, a line command string has been entered. However, an invalid <x start> value has been specified.

¬GL30;A;1;1;600

The A/C-7 RO would cause all characters, including the invalid value “A” to be printed:

A;1;1;600

3. As an alternative to using the

semi-colon “;” as a separator between parameters, you may also enter a comma “,” or a forward slash “/”.

4.Do not enter numeric values with commas (for example, 50,000). The printer interface will interpret the “ ,” to be the end of the parameter (so that 50,000 would be interpreted as two values: value 1 = 50, value 2 = 000).

International users should also be aware that a decimal value used to specify line width (in

mm)such as “1,5” (i.e. 1 1/2) is also interpreted as two separate values (i.e. value 1 = 1, value 2 = 5). To enter a valid decimal line width use the period “.” (i.e. 1.5

89