Bloomfield WFAE-55FS Oil Disposal Container, 1-1/4 NPT “STREET” ELBOW 1-1/4 NPT x DRAIN PIPE

Screw provided 1-1/4 NPT STREET ELBOW into DRAIN VALVE. Position female end to point forward.

Screw provided 1-1/4 NPT x 12” DRAIN PIPE into elbow. Hand tight is sufficient.

Place a suitable METAL OIL DISPOSAL CONTAINER under DRAIN PIPE.

IMPORTANT:

Remember to fill frypot to the COLD OIL LINE with fresh liquid shortening prior to turning POWER SWITCH to FRYER Energizing the fryer without oil covering the elements will cause serious damage. Damage due to operating fryer without oil covering elements is NOT covered by warranty.

OIL

DISPOSAL

CONTAINER

1-1/4 NPT “STREET” ELBOW

1-1/4 NPT x 12"

DRAIN PIPE

363 30007 OpManual for WFAE-55F/FS Electric Fryer

Slowly turn DRAIN VALVE LEVER down toward the OPEN (vertical) position. Fill the container no more than 1/2 full.

Close the DRAIN VALVE and allow oil to finish draining from pipe before removing container. Dump used oil into your WASTE OIL CONTAINER. Continue this process until frypot is empty.

Close the DRAIN VALVE by rotating DRAIN VALVE LEVER up to the CLOSED (horizontal) position.

Using suitable gloves, unscrew 1-1/4 NPT x 12” DRAIN PIPE from ELBOW. Unscrew ELBOW from DRAIN VALVE. Store these items in a convenient place.

Reinstall the 1-1/4 NPT x 5-7/8” DRAIN PIPE into the DRAIN VALVE.

Clean up any spilled oil.

29