q After making preliminary adjustments, press down on each corner of the washer to make sure the unit does not wobble. If it does wobble, lower the foot on that corner until the foot touches the floor firmly.
4. Re-check the leveling status of the appliance.
5. Fine tune the leveling of your washer by checking with a bubble level after running your first load of laundry. This is a very important step.
the washer foot with a pair of pliers to keep it from turning while tightening the lock nut. It the foot does turn, it will change the height of the corner.
It may be necessary to hold
i
q Insert and tighten all transport bolts. Make sure that the tab on the transportation bolt is inserted
in the slot on the washing machine back panel.
q Prepare the transport bolts: Loosen the screw in the sleeve until the end of the screw is level with the end of the sleeve.
q Turning the foot out (clockwise) will raise the corner of the washer, turning the foot in (counter-clockwise) will lower the corner of the washer.
When the corner of the washerq Remove the covers. is satisfactorily raised or
lowered, lock the height-adjustable feet in place by turning the lock nut counter-clockwise until it locks tightly against the washer housing.
Transport, such as when moving out
Before transporting the washing machine:
-Turn off the water.
-Disconnect the washing machine from the power outlet.
-Dismantle the supply and drainage hoses.
-Install the transport bolts.
Preparing and inserting the transport bolts
11
