Bosch Appliances 500 Plus Series After Washing, During Washing, Canceling an active, program

q Press theStart/Pause button.	q	Press		theStart/Pause			button.
The indicator light is lit (red).		The Start/Pause indicator light
Display shows the run time of the		flashes.
selected program. The program	q	Open		the door.
starts.	q	Place/remove			the	laundry.
	q	Close		the door.
	q	Press		theStart/Pause			button.
		The	program		continues.
		The	indicator		light	is	lit (red).

After Washing

The Start/Pause indicator light goes out.

0:00 appears in the display.

i

When theStart/Pause indicator

light is lit (red), the program can be interrupted, however the door cannot be opened for safety reasons (water level, temperature

or speed too high).

i

Each program step is indicated by

the indicator lights under the display.

i

If the spin speed is too high, theq Open the door. Start/Pause indicator light is lit

(red). Laundry can be added in •Pause" mode when the drum is at a standstill.

During Washing	Canceling an active
	program

i

Due to the highly engineered

If

you would

like

to

terminate

a

program

suspension

of

this

appliance,

it and remove

the

laundry:

may experience

a

shudder or

i

If a program

is interrupted

at

a

high

shake

when

progressing from

Turn the program selectorOffto.

temperature, leave

the laundry

to

q

lower to higher spin speeds.

to

q

Close the taps.

This behavior is normal due

cool down until the glass is

cool

to

shifting of the drum system

and

touch.

NOTICE

should

not

cause

concern.

q

Turn the

program

selectorOffto.

Changing a program

qTurn the program selectorOffto.

qTurn the program selector to a newly selected program.

The Start/Pause indicator light flashes.

qIf required, change the settings;

see from Page 17.

qPress theStart/Pause button. The program starts.

Add a garment / Interrupting the program

q	Turn the program selector to				Occasionally check for any foreign
	Refresh.
					objects (e. g. coins, paper clips)
					between the drum and rubber seal
i	Select the desired spin speed			(but
					-To avoid			risk	of rust!
	not no	final	spin).
					q	Remove the			laundry.
q	Press	theStart/Pause button.
	Wait until this program ends.
q					i	After	washing, leave			the	loading
q	Open	the door.				door	ajar	to	allow the		inside of
q	Unload	the	laundry.			the	washing		machine	to	dry.

iIf a program is interrupted at a high temperature, the door may remain locked until the appliance has cooled down.

You can put laundry in the drum after i If the program is terminated by washing begins, take laundry out of the switching off the appliance, the

drum early or interrupt the program at door may remain locked. any time.

i

It is not recommended to add

i

laundry after the washing phase is complete.

You can add or reduce laundry as long as theStart/Pause indicator light flashes (red).

19