Bosch Appliances 800 Series manual Washing With, Standard Settings

Unbalanced

load

detection

system

The

automatic unbalanced

load

Washing

with

detection

system

spins the

laundry

several times to ensure even

Standard

Settings

distribution.

If the

wash

load

is

unevenly

distributed,

it will

not spin (for

safety

reasons)

or

The specified standard settings are

the

for the

selected program.

final

spin

speed

is reduced.

optimized

willIf you do

not want to change these

In the

wool

program

the appliance

attempt to start the spin cycle only

standard settings:

twice in order to prevent shrinking.

Displayed

Time

Due

to these and other characteristics

of the controls the actual

cycle time

will

vary.

When

a

program

has been

selected,

the expected cycle time is

displayed.

The following will effect the displayed

time:

-Load size

-Repeated spin attempts to evenly

distributed load q Turn on the water taps.

qIf necessary, press the button(s) for additional option(s).

The indicator light of the selected button is lit (red).

iIf an incorrect combination was inadvertently selected, the indicator light of the selected button is turned off and a signal is emitted.

-

-

-

i

Additional rinse cycles if excessive foam occurs

Water pressure is too low

Selection of additional options, e.g. •Rinse plus"

You may notice these effects (more or less time) changing the displayed time when they occur in the cycle. If no options are selected and these effects do not occur, the time indicated will be time that the cycle will finish.

q Press theStart/Pause	button.
The indicator light is	lit (red).

qTurn the program selector to the desired program.

qLoad the washing machine and close the door.

The Start/Pause indicator light flashes (red).

	The program	starts.
i	Each program step is indicated in
	the display	field.

Washing with individual settings is described on the next page.

20