
34 en Upgrade RPSRPS
4.1.2 | View the RPS Documentation and Start the Installation Process | |
| 1. | Insert the RPS |
|
| The RPS startup program should automatically start. |
|
| If the startup program does not automatically start: |
|
| a. Select Start > Run… |
|
| b. At the prompt, type: X:\setup.exe. |
|
| "X" = the drive letter assigned to your |
| 2. | When the startup window opens, select a language from the list provided. An instruction |
|
| window opens in the selected language. |
3.From the instruction window, you can open the RPS documentation and install RPS.
| 4. Click Install to start the installation process. |
| You are ready to prepare the installation of the SQL database and RPS. |
4.1.3 | Upgrade RPS |
| When you click Install on the startup instruction window, RPS automatically checks for .NET |
2.0 or later, and installs it if necessary. RPS then detects the existing SQL database and connects to it. The process to upgrade RPS then starts.
4998141259 12 2011.10 | Installation Guide | Bosch Security Systems, Inc. |