Bosch Appliances D5500CU manual Modify, Repair, or Remove RPS, Modify RPS

52 en MaintenanceRPS

6.2	Modify, Repair, or Remove RPS
6.2.1	Modify RPS
	NOTICE!

To modify the current RPS installation, you must use the original installation files.

– If RPS was installed from the CD-ROM, you must use the CD-ROM.

– If RPS was installed from a folder containing the installation files, you must use the same folder in the location it resided at when RPS was installed.

To install other features that were not initially installed, such as Unattended Operation, or remove currently installed features:

1.Select Start > Settings > Control Panel > Add/Remove Programs. The Add/Remove Programs dialog opens.

2.Scroll down the list until you see RPS. Click RPS to select it.

3.Click Change. The RPS Setup Maintenance dialog opens.

4.Click Modify, and then click Next. The Select Features dialog opens.

4998141259 12 2011.10 Installation Guide Bosch Security Systems, Inc.