RPSMaintenance en 61

6.4

Recover Old Database Files

NOTICE!

You cannot point RPS to a database created in an older version of RPS. Doing so either produces errors, or it corrupts the database.

To recover control panel accounts that were not exported before installing the new version of RPS:

1.Uninstall the new version of RPS. Refer to Section 6.2.4 Remove RPS on page 54.

2.Reinstall the old version of RPS (version 5.11 or earlier).

3.When the installation asks if you want to install a new database, click Yes.

4.When the installation is complete, restart your PC and then start RPS.

5.Select Config > System > File Locations.

6.Select the database file, and click Modify.

7.When the Modify Location dialog opens, browse to the folder named "database.000" in the RPS directory. This is the folder where your old accounts were placed when you first upgraded RPS.

8.Click OK and exit RPS.

9.Restart RPS.

10.Verify that your accounts appear in the Panel List.

11.Export your accounts. Refer to Export in the RPS General Help File for more information.

12.Remove the old version of RPS, and then reinstall the new version.

13.Import your old accounts into the new version of RPS. Refer to Import in the RPS General Help File for more information.

14.Verify that your old accounts now appear in the Panel List.

Bosch Security Systems, Inc.

Installation Guide

4998141259 12 2011.10

Page 61
Image 61
Bosch Appliances D5500CU manual Recover Old Database Files, Select Config System File Locations