34 en Configuring the AutoDome 700 Series | AutoDome 700 Series IP PTZ Camera |
|
|
–AutoSensUp: increases camera sensitivity by increasing the integration time on the camera. This is accomplished by integrating the signal from a number of consecutive video frames to reduce signal noise.
If you select this option, the AutoDome makes the following change automatically:
– Auto Iris: switches to Constant
Shutter
Adjusts the electronic shutter speed (AES). Controls the time period for which light is gathered by the collecting device. The default setting is 1/60 second for NTSC and 1/50 for PAL cameras. The range of settings is from 1/1 to 1/10000.
Backlight Compensation
Optimizes the video level for the selected area of the image. Parts outside this area may be underexposed or overexposed. Select On to optimize the video level for the central area of the image. The default setting is Off.
High Sensitivity Setting
Stabilization
Turns on video stabilization.
Wide Dynamic Range
Turns on the wide dynamic range feature. Wide Dynamic Range improves image reproduction in extreme
Night Mode
Selects night mode (B/W) to enhance lighting in low light scenes. Select from the following options:
–Monochrome: Forces the camera to stay in Nigh Mode and transmit monochrome images.
–Color: The camera does not switch to Night Mode regardless of ambient light conditions.
–Auto (default): The camera switches out of Night Mode after the ambient light level reaches a
Night Mode Threshold
Adjusts the level of light at which the camera automatically switches out of night mode (B/W) operation. Select a value between 10 and 55 (in increments of 5), where 10 is earlier and 55 is later.
Noise Reduction
Turns on the 2D and 3D noise reduction feature.
Noise Reduction Level
Adjusts the noise level to the appropriate level for shooting conditions. Select a value between 1 and 5.
F.01U.215.777 1.0 2011.07 | User Manual | Bosch Security Systems, Inc. |
