AutoDome 700 Series IP PTZ Camera | Using the AutoDome 700 Series en | 7 |
|
|
|
If you choose to use a computer running Microsoft Internet Explorer or any of the Bosch software, the computer must conform to the following minimum requirements:
–Operating System: Windows XP (Service Pack 3) or Windows 7 (32 or 64 bits)
–Processor: Intel Pentium Quad Core, 3.0 GHz or comparable
–RAM: 2048 MB
–Free Hard Disk Space: 10 GB
–Video system: NVIDIA GeForce 8600 or higher display with a minimum of
–Network interface:
–Software:
–Microsoft Internet Explorer, version 7.0 or higher
–Bosch Video Client (BVC)
–DirectX 9.0c
–MPEG ActiveX utility
–Sun Java Virtual Machine
For the latest versions of the Bosch Video Client, DirectX, ActiveX, and the Sun Java Virtual Machine software, go to www.boschsecurity.com, then navigate to the AutoDome 700 Series product page and download the software from the Software tab.
NOTICE!
Ensure the graphics card is set to
2.3 | Connecting the AutoDome 700 Series to the PC | |
| 1. | Install the AutoDome 700 Series according to the instructions in the VG5 AutoDome |
|
| Installation manual. |
| 2. | Connect an Ethernet cable from the AutoDome 700 Series RJ45 connector to a dedicated |
|
| network switch to bypass the Local Area Network (LAN). |
| 3. | Connect the dedicated network switch to the RJ45 connector on the PC (see option A |
|
| below). |
NOTICE!
The AutoDome 700 Series can also be connected directly to a PC using an Ethernet crossover cable with RJ45 connectors (see option B below).
Figure 2.1 AutoDome 700 Series System Configuration
1AutoDome 700 Series
2 IP Connection
3 Network Switch
4 Computer
Bosch Security Systems, Inc. | User Manual | F.01U.215.777 1.0 2011.07 |
