6 en Using the AutoDome 700 SeriesAutoDome 700 Series IP PTZ Camera
2 | Using the AutoDome 700 Series | ||
|
| The AutoDome 700 Series transmits PTZ control commands and images over a TCP/IP | |
|
| network. It also allows users to configure the camera display settings, camera operating | |
|
| settings, and to configure the network parameters. | |
|
| The AutoDome 700 Series incorporates a network video server in the IP module. The primary | |
|
| function of the server is to encode video and control data for transmission over a TCP/IP | |
|
| network. With its H.264 encoding, it is ideally suited for IP communication and for remote | |
|
| access to digital video recorders and multiplexers. The use of existing networks means that | |
|
| integration with CCTV systems or local networks can be achieved quickly and easily. Video | |
|
| images from a single camera can be simultaneously received on several receivers. | |
2.1 | Overview of Features | ||
|
| The AutoDome 700 Series includes the following functionality: | |
|
|
|
|
|
| Function | Description |
|
|
|
|
|
| Video Encoding | The camera uses the H.264 compression standards and ensures that the |
|
|
| data rate remains low even with high image quality and can also be |
|
|
| adapted to local conditions within wide limits. |
|
|
|
|
|
| Streaming | Encodes multiple data streams simultaneously according to individually |
|
|
| customized profiles. This feature creates data streams that can serve |
|
|
| different purposes. For example, one (1) data stream for recording and |
|
|
| one (1) data stream optimized for transmission over the Local Area |
|
|
| Network (LAN). |
|
|
|
|
|
| Multicast | Enables simultaneous, |
|
|
| network must implement the UDP and IGMP V2 protocols as a |
|
|
| prerequisite for Multicasting. |
|
|
|
|
|
| Configuration | Allows configuration for all camera settings from a Web browser on the |
|
|
| local network (Intranet) or on the Internet. You can also update the |
|
|
| firmware, load device configurations, store configuration settings, and |
|
|
| copy these settings from one camera to another. |
|
|
|
|
|
| Snapshots | Allows you to take and store individual video frames as JPEG images from |
|
|
| the Web browser interface. |
|
|
|
|
|
| Record | Allows configuration for the recording options of the IP module. You can |
|
|
| record video from the Livepage to a hard drive. |
|
|
|
|
2.2 | System Requirements | ||
|
| The AutoDome 700 Series requires specific software and hardware to allow a user to view live | |
|
| images and to configure camera settings over a TCP/IP network. These requirements are: | |
|
| – A computer with the Microsoft Windows XP, Vista, or Windows 7 operating system, | |
|
| network access, and the Microsoft Internet Explorer Web browser version 7.0 or later, or | |
– A computer with Microsoft Windows XP, Vista, or Windows 7 operating system, network access, and reception software such as the Bosch Video Management System or the Bosch Video Client, or
NOTICE!
The Web browser must be configured to enable Cookies to be set from the IP address of the unit.
In Windows Vista, deactivate protected mode on the Security tab under Internet Options. You can find notes on using Microsoft Internet Explorer in the online Help in Internet Explorer.
F.01U.215.777 1.0 2011.07 | User Manual | Bosch Security Systems, Inc. |
