18 en Configuring the AutoDome 700 SeriesAutoDome 700 Series IP PTZ Camera
4 | Configuring the AutoDome 700 Series |
The SETTINGS page provides access to the configuration menu, which contains all the unit's parameters arranged in groups. You can view the current settings by opening one of the configuration screens. You can change the settings by entering new values or by selecting a predefined value from a list field.
There are two options for configuring the unit or checking the current settings:
–Basic mode
–Advanced mode
In Basic Mode the most important parameters are arranged in seven groups. This allows you to change the basic settings with just a few entries and then put the device into operation. Advanced Mode is recommended for expert users or system support personnel. You can access all unit parameters in this mode. Settings that affect the fundamental functionality of the unit (such as firmware updates) can only be altered in the advanced mode.
All parameter groups are described in this chapter in the order in which they are listed in the configuration menu, from the top of the screen to the bottom.
CAUTION!
The settings in the advanced mode should only be processed or modified by expert users or system support personnel.
All settings are backed up in the AutoDome 700 Series memory so they are not lost even if the power fails.
Starting Configuration
Click the SETTINGS link in the upper section of the window. The Web browser opens a new page with the configuration menu.
Navigation
1.Click one of the menu items in the left window margin. The corresponding submenu is displayed.
2.Click one of the entries in the submenu. The Web browser opens the corresponding page.
Making Changes
Each configuration screen shows the current settings. You can change the settings by entering new values or by selecting a predefined value from a list field.
After each change, click Set to save the change.
CAUTION!
Save each change with the associated Set button.
Clicking the Set button saves the settings only in the current field. Changes in any other fields are ignored.
F.01U.215.777 1.0 2011.07 | User Manual | Bosch Security Systems, Inc. |
