Bosch Power Tools RA1181, RA118EVSTBPLUS manual Attach the Switch to the Fascia FIG

Router Table Assembly

ATTACH THE SWITCH TO THE FASCIA (FIG. 3)

1.Align the two outermost holes on the top of the switch assembly (10) with the holes in the front fascia panel (9), as shown in Fig. 3.

2.Insert two #10-32 KEPS nuts (24) into the hex-shaped recesses in the back of the switch

assembly (10), toothed side out, and secure the switch to the fascia panel with two #10-32 x 3/4″ truss-head machine screws (30) while holding the KEPS nuts in place in the recess with your finger.

ATTACH THE SWITCH/FASCIA ASSEMBLY TO THE ROUTER TABLE (FIG. 4)

NOTE: The fascia assembles to the inside of both the table legs and the router tabletop.

1.Line up the holes on the fascia panel with the holes in the table legs and the two slots on the front of the router tabletop.

2.Attach the fascia panel to the router table top using two #10-32 x 3/4″ truss-head machine screws (30) and two #10-32 KEPS nuts (24), as shown in Fig. 4.

3.Attach the fascia to the legs using four #10-32 x 3/4″ truss-head machine screws (30) and four #10-32 KEPS nuts (24), as shown in Fig. 4.

4.TIGHTEN all screws SECURELY.

FIG. 3

24

9 30

10

FIG. 4

3024

30

11