Breville BJB840 manual Operating the Blender

OPERATING THE BLENDER

Operating the BLENDER

1.Ensure the Blender is correctly assembled with the Safety Locking Arm securely locked into the vertical position.

NOTE

As a safety precaution, the Blender will not operate if the Safety Locking Arm is not securely locked into the vertical position.

2.Add food or liquid to the Blender Jug ensuring not to exceed the ‘MAX’ line. When filled at or near the ‘MAX’ line, ensure to place one hand on the Lid to avoid displacement during operation.

NOTE

If any liquid appears around the top of the Motor Base, ensure the Blender is turned off before removing the Blender Jug from the Motor Base. Immediately dry the Motor Base with a soft cloth or paper towel to absorb the liquid and check that the Removable Silicone Gasket and Removable Blade Assembly are correctly assembled (see Assembling the Blender, page 31 step 2).

3.Place the Lid firmly into position on top of the Blender Jug and insert the Inner Lid by turning clockwise until securely locked into position.

NOTE

The Lid features a patented ring- pull removal. The ring-pull design allows the Lid to be easily removed with a simple leverage action, yet fit tightly onto the Blender Jug to avoid displacement during operation.

4.Plug the power cord into a 230V/240V power outlet. The START STOP button surround will illuminate..

NOTE

The button surround will illuminate for 2 minutes before entering stand- by mode. To re-activate the Blender out of stand-by mode, press or turn the START STOP button.

5.Rotate the START STOP button to the desired speed. For your convenience, a blending speed guide is printed on the stainless steel collar of the Blender Jug.

34