DISASSEMBLING THE BLENDER

DISASSEMBLING the BLENDER

1.Ensure the Blender is turned off, the power is switched off at the power outlet and, the power cord is unplugged from the power outlet.

2.Pull the Safety Locking Arm downwards and over the grooves on either side of the Blender Jug base.

3.Remove the Blender Jug from the Motor Base.

4.Remove the Blade Assembly (with the Silicone Gasket still in place) from the Blender Jug base by turning counterclockwise. The stainless steel collar of the Blender Jug is not removable.

NOTE

If the Blade Assembly is difficult to remove by hand, insert the included Blade Removal Tool into the Blade Assembly base and turn counterclockwise.

WARNING

Be careful when handling the blending blades as they are sharp. Mishandling of the blades may cause injury.

5.Remove the Silicone Gasket from the Blade Assembly.

38

Page 38
Image 38
Breville BJB840 manual Disassembling the Blender