Breville BJB840 manual Overload Protection

OPERATING THE BLENDER

The Breville Juice & Blend is fitted with protection devices as a safety precaution to prevent both personal injury and damage to the appliance.

OVERLOAD PROTECTION

This protection device safeguards against overloading the motor with excessive loads.

If overloading occurs, the Overload Protection will automatically de-activate the motor. When this occurs, unplug the power cord from the wall outlet and press the OVERLOAD RESET button found on the underside of the Motor Base. This will reset the Overload Protection, enabling you to reconnect the power cord to the wall outlet and recommence normal use.

OVERHEAT PROTECTION

This protection device safeguards against overheating of the motor with excessive loads.

If overheating occurs, the START STOP button surround will flash red and the Overheat Protection will automatically de-activate the motor. When this occurs, unplug the power cord from the wall outlet and allow the appliance to cool for at least 15 minutes. Then reconnect the power cord to the wall outlet and recommence normal use.

ELECTRONIC PROTECTION

This protection device will automatically de-activate the motor if the motor is stalled.

If the motor stalls, the START STOP button surround will flash red and the Electronic Protection will automatically de-activate the motor. When this occurs, unplug the power cord from the wall outlet. Either too much food is being blended at one time

or the pieces are not small enough. Try removing a portion of the mixture, cutting food into smaller pieces of even size and/or processing a smaller amount per batch. For best results the food should be chopped into pieces no larger than 2cm (¾ inch). Then reconnect the power cord to the wall outlet and recommence normal use.

36