BEFORE FIRST USE
Preparing the oven for use
NOTE
In order to remove any protective substances inside the oven, it is necessary to run the oven empty for
20minutes.
1.Remove and safely discard any packing material, promotional labels and tape from the oven.
2.Remove the crumb tray, wire rack, grill rack, baking pan and pizza pan from the packaging. Wash them in warm, soapy water with a soft sponge, rinse and dry thoroughly. Insert the crumb tray into the oven.
3.Wipe the interior of the oven with a soft damp sponge. Dry thoroughly.
4.Place the oven on a flat, dry surface. Ensure there is a minimum distance of 20cm of space on both sides of the appliance. Ensure there are no items on top of the oven.
5.Unwind the power cord completely and insert the power plug into a grounded wall outlet.
6.The oven alert will sound twice and the LCD screen will illuminate blue. The function options will appear with an indicator on the preset BAKE function.
7.Turn the FUNCTION dial to the right until the indicator reaches the PIZZA function. The top figure on the LCD screen indicates the preset temperature of 210ºC. Turn the temperature dial clockwise
to 230ºC. Keep the preset time of 20 minutes. The preset 
CONVECTION setting and preset 
FROZEN FOODS setting will also be displayed.
FUNCTION
DIAL
ROTATE
PIZZA DEFAULT | PIZZA |
8.Press the START/CANCEL button to activate this setting. The button surround will illuminate red and the oven alert will sound.
9.The LCD screen will flash PREHEATING. Once the oven has reached the set temperature, the temperature alert will sound.
10.The timer will be displayed and automatically begin to count down in one minute increments.
NOTE
When the oven is turned on for the first time, it may emit vapors. This is due to the protective substances inside the oven. It is safe and not detrimental to the performance of the oven.
11.At the end of the cooking cycle, the oven alert will sound three times and the START/CANCEL button surround will cease to illuminate.
12.The oven is now ready to use.
NOTE
The cooking cycle can be stopped at any time by pressing the START/CANCEL button. This will cancel the cycle, the button surround illumination will go out and LCD screen will change to blue.
15
