SilkWorm 4016 Hardware Reference Manual 1-5
Publication Number: 53-1000175-01
Switch Characteristics 1
Nonport Side
The nonport side of the SilkWorm 4016 (shown in Figure1-3) is seated into the . You do not need to do
anything special to line up the SilkWorm 4016: it will seat correctly when the insertion arm is closed.
When the switch is inserted the backplane connectors activate a connection port, allowing the access
and control of the SilkWorm 4016 via the .
Figure 1-3 Nonport Side, Viewed from Top
1 Top of switch
2 Connection ports
Labeling
Figures1-4 and 1-5 show the labels appearing on the SilkWorm 4016. A second serial label is located
beneath the insertion arm on the chassis, visible only when the arm is extended.
To extend the insertion arm, gently squeeze the plastic tab (top-to-bottom) and pull outward.
scale:3/8" = 1"
80-0001718-01Rev.B
RQ040000133
MAC00051E347029
WWN10:00:00:05:1E:34:70:29
2
1
84-0000123-01RevX
XXX10:00:00:05:1E:34:70:29