Brocade Communications Systems 4016 manual CE Statement, Canadian Requirements, Laser Compliance

Regulatory Compliance

CE Statement

A

Caution

This is a Class A product. In a domestic environment, this product might cause radio interference, and the user might be required to take corrective measures.

The standards compliance label on the SilkWorm 4016 contains the CE mark which indicates that this system conforms to the provisions of the following European Council directives, laws, and standards:

•Electromagnetic Compatibility (EMC) Directive 89/336/EEC and the Complementary Directives 92/31/EEC and 93/68/EEC

•Low Voltage Directive (LVD) 73/23/EEC and the Complementary Directive 93/68/EEC

•EN50082-2/EN55024:1998 (European Immunity Requirements)

-EN61000-3-2/JEIDA (European and Japanese Harmonics Spec)

-EN61000-3-3

Canadian Requirements

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations, ICES-003 Class A.

Laser Compliance

This equipment contains Class 1 laser products and complies with FDA Radiation Performance Standards, 21 CFR Subchapter I and the international laser safety standard IEC 825-2.

Caution

Use only optical transceivers that are qualified by Brocade Communications Systems, Inc. and comply with the FDA Class 1 radiation performance requirements defined in 21 CFR Subchapter I, and with IEC 825-2. Optical products that do not comply with these standards might emit light that is hazardous to the eyes.

RTC Battery

Caution

Do not attempt to replace the real-time clock (RTC) battery. There is danger of explosion if the battery is incorrectly replaced or disposed of. Contact your switch supplier if the real-time clock begins to lose time.

SilkWorm 4016 Hardware Reference Manual A-5

Publication Number: 53-1000175-01