Brother CPS5XVY Needle and presser foot section, Right-side/rear view, Memo, a Buttonhole lever

———————————————————————————————————————————————————

Needle and presser foot section

aButtonhole lever

The buttonhole lever is used with the one-step buttonhole foot to create buttonholes.

bThread guide disk

Pass the thread through the thread guide disk when using the needle threader to thread the needle.

cNeedle bar thread guide

Pass the upper thread through the needle bar thread guide.

dNeedle plate

The needle plate is marked with guides to help sew straight seams.

eNeedle plate cover

Remove the needle plate cover to clean the bobbin case and race.

fBobbin cover

Open the bobbin cover to set the bobbin.

gFeed dogs

The feed dogs feed the fabric in the sewing direction.

hPresser foot

The presser foot applies pressure consistently on the fabric as sewing takes place. Attach the appropriate presser foot for the selected stitch.

iPresser foot holder

The presser foot is attached onto the presser foot holder.

Right-side/rear view

aHandle

Carry the sewing machine by its handle when transporting the machine.

bHandwheel

Turn the handwheel toward you to raise and lower the needle. The handwheel should be turned towards you (counterclockwise).

cEmbroidery card slot Insert the embroidery card.

dUSB port connector

Plug the USB cable into the USB port connector.

eAir vent

The air vent allows the air surrounding the motor to circulate. Do not cover the air vent while the sewing machine is being used.

fMain power switch

Use the main power switch to turn the sewing machine ON and OFF.

gFoot controller jack

Insert the plug on the end of the foot controller cable into the foot controller jack.

hPower supply jack

Insert the plug on the power cord into the power supply jack.

iFeed dog position switch

Use the feed dog position switch to lower the feed dogs.

jPresser foot pressure dial

Use the presser foot pressure dial to adjust the amount of pressure that the presser foot applies.

kPresser foot lever

Raise and lower the presser foot lever to raise and lower the presser foot.

Memo

zRefer to pages 11 through 14 while you are learning to use your machine.

12