Brother CPS5XVY operation manual Embroidery step by step

EMBROIDERY —————————————————————————————————————————————

Embroidery step by step

The basic steps for embroidery are as follows.

1	Presser foot attachment	Attach the embroidery foot “Q”.
		For details on attaching the embroidery foot, refer to “Attaching the
		embroidery foot” (page 145).
		↓
2	Checking the needle	Use a needle matched to the fabric.
		For details on replacing the needle, refer to “Replacing the needle” (page
		40).
		↓
3	Embroidery unit	Attach the embroidery unit.
		For details on attaching the embroidery unit, refer to “Attaching the
	attachment
		embroidery unit” (page 148).
		↓
		When using other kinds of embroidery bobbin thread, use the optional
4	Replacing the bobbin case	alternate bobbin case (pink marking).
		For details on replacing the bobbin case, refer to “Cleaning the race”
		(page 180).
		↓
		For the bobbin thread, wind embroidery bobbin thread and set it in
5	Bobbin thread setup	place.
		For details on setting up the bobbin thread, refer to “Winding/Installing
		the Bobbin” (page 23).
		↓
		Attach a stabilizer material to the fabric, and hoop it in an embroidery
6	Fabric preparation	frame.
		For details on preparing the fabric, refer to “Preparing the Fabric” (page
		151).
		↓
7	Embroidery frame	Attach the embroidery frame to the embroidery unit.
		For details on attaching the embroidery frame, refer to “Attaching the
	attachment
		Embroidery Frame” (page 155).
		↓
8	Pattern selection	Select an embroidery pattern.
		For details on selecting embroidery patterns, refer to “Selecting
		Embroidery Patterns” (page 157).
		↓
9	Checking the layout	Check and adjust the size and position of the embroidery.
		For details on adjusting the layout, refer to “Adjusting the layout” (page
		169).
		↓
10	Embroidery thread setup	Set up embroidery thread according to the pattern.
		For details on setting up the thread, refer to “Upper Threading” (page
		29).

144