Brother CPS5XVY operation manual Appendix, in the LCD

APPENDIX ——————————————————————————————————————————————

Symptom	Probable Cause	Remedy	Reference
The sewing lamp	The sewing lamp is damaged.	Contact your retailer or the nearest	–
		authorized service center.
does not come on.
	The machine is not turned on.	Turn on the machine.	page 17
Nothing appears	The brightness of the LCD is either	Adjust the brightness of the LCD.	page 190
in the LCD.	too light or too dark.
Machine does not	An animation is displayed on the	Touch the LCD with your finger, and
operate when			page 18
	LCD.	the animation will disappear.
button is pressed.
Embroidery unit	No pattern selected.	Select a pattern.	page 157
	The embroidery unit is not set up
does not move.		Set the embroidery unit up correctly.	page 148
	correctly.
	The fabric is not fully stretched on	Stretch the fabric properly on the
	the embroidery frame. The fabric		page 152
		embroidery frame.
	is loose.
		Always use stabilizer material for
		embroidery with stretch fabrics, thin
	No stabilizer material is attached.	fabrics, fabrics with a loose weave	page 151
		and fabrics where stitches easily
		contract.
	The thread is tangled and the	Remove the tangled thread. When
		the bobbin case is plugged up, clean	page 180
	bobbin case, etc., is plugged up.
		the race.
	The thread tension is incorrect.	Adjust the tension of the upper	page 171
		thread.
		If the embroidery unit carriage or
	Objects are placed near the	embroidery frame bumps into objects,
Embroidery not		the pattern will be misaligned. Do not	page 149
	carriage or embroidery frame.
		place objects within the range of
neatly done.
		embroidery frame motion.
	Material coming out of the	Stretch the fabric on the frame once
		again so that the material coming out
	embroidery frame is causing	of the embroidery frame does not	–
	problems.	cause problems, rotate the pattern
		and embroider.
	A heavy fabric is being	If embroidery is done with the fabric
		hanging off the table, the embroidery	–
	embroidered, and the fabric is
		unit movement will be impaired.
	hanging off the table.
		Support the fabric while embroidering.
	The fabric is catching. It is	Stop the sewing machine and set the	–
	pinched.	fabric up correctly.
	The carriage was moved while the	If the carriage is moved during the
	embroidery frame was being	process, the pattern may be misaligned.	–
	removed or attached during	Be careful when removing or
	embroidery.	attaching the embroidery frame.

186