Brother CPS5XVY operation manual Threading the upper thread, Getting Ready

GETTING READY ————————————————————————————————————————————

Threading the upper thread

Set the spool of thread on the spool pin, and then thread the machine.

aTurn on the sewing machine.

bRaisefoot. the presser foot lever to raise the presser

a

aPresser foot lever

Note

zIf the presser foot is not raised, the sewing machine cannot be threaded.

cPress (“Needle Position” button) once or twice to raise the needle.

1

a“Needle Position” button

XThe needle is correctly raised when the mark on the handwheel is at the top, as shown below. Check the handwheel and, if this mark is not at

this position, press (“Needle Position” button) until it is.

dOpen the top cover.

eRemovespool pin.the spool cap that is inserted onto the

1

2

aSpool pin

bSpool cap

fPlace the spool of thread onto the spool pin. Slide the spool onto the pin so that the spool is horizontal and the thread unwinds to the front at the bottom.

CAUTION

●If the spool or the spool cap is not positioned correctly, the thread may become tangled around the spool pin and the needle may break.

gSlide the spool cap onto the spool pin. Slide the spool cap as far as possible to the right, as shown, with the rounded side on the left.

1

aMark on handwheel

30