Using the scanner glass
You can use the scanner glass to scan or copy the pages of a book or single sheets of paper. Documents can be up to 8.5 inches wide and up to 14 inches long (215.9 mm wide to 355.6 mm long).
To use the scanner glass, the ADF must be empty.
a Lift the document cover.
b Using the document guidelines on the left, center the document face down on the scanner glass.
c Close the document cover.
CAUTION
If the document is a book or is thick, do not slam the cover or press on it.
Loading documents and paper
Acceptable paper and other media
Print quality may vary according to the type of | 2 |
paper you are using. |
You can use the following types of media: plain paper, transparencies, labels or envelopes.
For best results, follow the steps below:
Use paper made for plain paper copying.
Use paper that is 20 to 24 lb (75 to 90 g/m2).
Use labels or transparencies which are designed for use in laser printers.
When using transparencies remove each sheet immediately to prevent smudging or paper jams.
Avoid touching the printed surface of the paper immediately after printing.
Use long grain paper with a neutral Ph value, and a moisture content of approx. 5%.
Recommended media
To get the best print quality, we suggest using the following paper.
Paper Type | Item |
Plain paper | Xerox 4200DP 20 lb |
|
|
| Hammermill Laser Paper 24 |
| lb |
|
|
| (Xerox Premier 80g/m2) |
| (Xerox Business 80 g/m2) |
| |
Recycled paper | (Xerox Recycled Supreme) |
|
|
Transparency | 3M CG 3300 |
|
|
Labels | Avery laser label #5160 |
| (Avery laser label L7163) |
|
|
11