Packing and shipping the machine
When you transport the machine, use the packing materials that came with your machine. If you do not pack the machine properly, you could void your warranty. The machine should be adequately insured with the carrier.
a Turn off the machine’s power switch.
b Unplug all the cables and AC power cord from the machine.
c Push the Scanner Lock Lever down to lock the scanner. This lever is located on the left of the scanner glass.
CAUTION
Damage caused to your machine by failure to lock the scanner before packing and shipping may void your warranty.
d
e Take out the drum unit and toner cartridge assembly. Leave the toner cartridge installed in the drum unit.
f Put the drum unit and toner cartridge assembly into the plastic bag and seal the bag.
g Close the front cover.
Troubleshooting and routine maintenance
h Wrap the machine in the plastic bag and
put it in the original carton with the original packing material.
i Pack the drum unit and toner cartridge assembly, AC power cord and printed materials in the original carton as shown below.
Note
If you are returning your machine to Brother as part of the Exchange Service, pack only the machine. Keep all separate parts and printed materials to use with your ‘Exchange’ machine.
j Close the carton and tape it shut.
79