Print Quality Difficulties (Continued)

Difficulties

Suggestions

Printouts are too light.

„ If this problem occurs when making copies turn Toner Save mode to off in the

 

machine menu setting. (See Toner save on page 19.)

 

„ Set Toner Save mode to off in the Advanced tab in the printer driver. (See

 

Advanced tab in the Software User’s Guide on the CD-ROM.)

 

 

Network Difficulties (DCP–8065DN only)

Difficulties

Suggestions

Cannot print over a wired Network.

„ Make sure your machine is powered on and is on-line and in Ready mode.

 

Print the Network Configuration list to see your current Network settings.

 

Reconnect the LAN cable to the hub to verify that the cable and network

 

connections are good. If possible, try connecting the machine to a different

 

port on your hub using a different cable. If the connections are good, the

 

upper LED of the back panel of the machine will be green.

 

„ If you are using a wireless connection or are having Network problems see

 

the Network User's Guide on the CD-ROM for more information.

 

 

The network scanning feature

(For Windows® only) The firewall setting on your PC may be rejecting the

does not work.

necessary network connection. Follow the steps below to configure the firewall.

 

If you are using any other than the firewalls mentioned below, see the instructions

 

for that software or contact the software manufacturer.

 

<Windows® XP SP2>

 

1. Click the Start button, ‘Settings’, ‘Control Panel’ and then ‘Windows

 

Firewall’. Make sure that Windows Firewall on the ‘Basic’ tab is set to on.

 

2. Click the ‘Exceptions’ tab and ‘Add port’ button.

 

3. Enter any name, port number (54295 for network scanning), select ‘UPD’

 

and click ‘OK’.

 

4. Make sure that the new setting is added and is checked, and then click ‘OK’.

 

For Windows® XP SP1, please visit the Brother Solutions Center.

Your computer cannot find your

<For Windows® users>

machine.

The firewall setting on your PC may be rejecting the necessary network

 

connection. For details, see the instruction above.

 

<For Macintosh® users>

 

Re-select your machine in the DeviceSelector application located in Macintosh

 

HD/Library/Printers/Brother/Utilities or from the Model pop-up menu of

 

ControlCenter2.

 

 

54