Press Menu, 1, 8.

Checking the remaining life of parts

You can see the remaining life of the machine’s drum unit and periodic maintenance parts on the LCD.

a Press Menu, 6, 7.

b Press a or b to choose 1.Drum,

2.Fuser, 3.Laser, 4.PF kit MP, 5.PF kit 1 or 6..PF Kit 2 1.

Press OK.

1PF Kit 2 appears only when the optional LT-5300 tray is installed.

c Press Stop/Exit.

Troubleshooting and routine maintenance

Reset

The following reset functions are available:

1Network

You can reset the print server back to its default factory settings such as the password and IP address information.

2All Settings

You can reset all the machine settings back to the settings that were set at the factory.

Brother strongly recommends you use this operation when you dispose of the machine.

Note

Unplug the interface cable when you reset All Settings.

How to reset

a

b Press a or b to choose 1.Network or

C

2.All Settings.

Press OK.

 

c Press a or b to choose 1.Reset or

2.Exit. Press OK.

d If you chose 1.Reset in step c, you will be asked to reboot the machine. Press a or b to choose 1.Yes or 2.No. Press OK.

If you choose 1.Yes, the machine will begin the Restart.

Note

You can also reset the Network settings by pressing Menu, 5, 0.

101