Sleep Time

The Sleep Time setting can reduce power consumption by turning off the fuser while the machine is idle.

You can choose how long the machine must be idle before it goes into sleep mode. When the machine receives computer data or makes a copy, the timer will be reset. The default setting is 005 minutes.

While the machine is in sleep mode the LCD will display Sleep. When printing or copying in sleep mode, there will be a short delay while the fuser warms up.

a Press Menu 1, 3, 2.

b Enter the length of time the machine is idle before entering sleep mode. Press OK.

c Press Stop/Exit.

Note

To turn off sleep mode, press Secure/Direct and Job Cancel at the same time in step b. Press a or b to choose Off. Press OK.

General Setup

Turning off the scanner lamp

The scanner lamp stays on for 16 hours before automatically switching off to preserve the life of the lamp and reduce power consumption.

To turn the scanner lamp off manually press

3

the d and c keys simultaneously. The scanner lamp will remain turned off until the next time you use the scanning feature.

Note

Turning the lamp off regularly will reduce the lamp’s life.

LCD Contrast

You can change the contrast to make the LCD look lighter or darker.

a Press Menu, 1, 5.

b Press d to make the LCD lighter. Or, press c to make the LCD darker. Press OK.

c Press Stop/Exit.

25