Chapter 6

Note

•Your digital camera must be switched from PictBridge mode to mass storage mode.

•If you want to print an index of the files, choose Index Print, and then press OK. Press Start to print the data.

•File names that are stored in your USB Flash memory drive can be displayed using the following characters on the LCD:

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9 $ % ’ ` - @ { } ~ ! # ( ) & _ ^

c Do one of the following:

„Press a or b to choose a setting you need to change and press OK, and then press a or b to choose an option for the setting and press OK.

„If you do not need to change the current default settings, go to step d.

Print File Set

aPaper Size

Media Type

bMultiple Page

Select ab or OK

Note

•You can choose the following settings:

Paper Size Media Type Multiple Page Orientation Duplex Collate Tray Use Print Quality PDF Option

•Depending on the file type, some of these settings may not appear.

44

d Press Start if you have finished.

e Press the dial pad key to enter the number of copies you want. Press OK.

Direct Print

 

FILE0_1.PDF

 

No. of Copies:

1

Press Start

f Press Start to print the data.

IMPORTANT

•To prevent damage to your machine, DO NOT connect any device other than a digital camera or USB Flash memory drive to the USB direct interface.

•DO NOT remove the USB Flash memory drive or digital camera from the USB direct interface until the machine has finished printing.

Note

•If you want to change the default setting for the paper tray to feed paper from, press Menu, 1, 4, 2 to change the paper tray setting.

•You can change the default settings for Direct Print by using the control panel when the machine is not in the Direct Print mode. Press Menu, 4 to enter the

USB Direct I/F menu. (See Menu table on page 106.)