Packing and shipping the machine

CAUTION

Make sure that the machine has fully cooled down by leaving it disconnected from the power for at least 30 minutes before packing.

When you transport the machine, use the packing materials that came with your machine. If you do not pack the machine correctly, you could void your warranty.

a Turn off the machine.

b Unplug all the cables and AC power cord from the machine.

c Push the Scanner Lock Lever down to lock the scanner. This lever is located on the left of the scanner glass.

IMPORTANT

Damage caused to your machine by failure to lock the scanner before packing and shipping may void your warranty.

d Press the front cover release button and open the front cover.

e Take out the drum unit and toner cartridge assembly. Leave the toner cartridge installed in the drum unit.

102

f Put the drum unit and toner cartridge assembly into a plastic bag and seal the bag.

g Close the front cover.

h Put the styrofoam piece marked “FRONT” into the original carton (1). Pack the drum unit and toner cartridge assembly (2) and put it in as shown below (3). Wrap the machine in the plastic bag and put it in the original carton (4). Put the printed material behind the machine (5).